 |  | 
Click On Photo For Larger View
The versatile automatic charger and maintainer for modern and classic batteries.
Perfect for maintenance of stored, unused or "stand-by" batteries, even for months on end.
Ideal for maintaining batteries in "classic", "veteran" and other vehicles not driven regularly.
Easy to use. Just select the charging output, 6V or 12V, according to the battery to be charged, then connect to the battery and to the mains. The rest is 100% automatic.
Simple but comprehensive LED status indication for power on, battery voltage selection, inverse polarity connection, charging, charge completed or battery sulphated.
Perfect for ALL rechargeable lead-acid deep-cycle & starter batteries of all constructions: filler cap types, fully sealed, "MF" motorcycle batteries, valve-regulated (VRLA), Gel electrolyte.
Highly effective charging using advanced constant current characteristics.
Detachable fused connection set with eyelets for fixing to battery posts allow easy application even with difficult to reach batteries. Detachable battery clamp connection set for bench charging.
Optional connection set for battery maintenance through car cigarette lighter or DIN 12V sockets.
Models for 220/240 volt supply with "BS" or "Euro" plugs, or for 110/120 Volt supply with "UL" plug.
Two Year Limited Warranty.
Technical Advantages
The advanced "IUoU-I" (marine quality) interactive 3 - stage charging program ensures a highly effective and complete charge despite the AccuaMate's compact size. This is achieved as follows:
A 1.2 Amps effective charge current is maintained constant throughout the main charging stage for maximum charging efficiency and minimum charge time, for both 12V and 6V batteries.
The charging voltage is precisely monitored and when this has risen to 14.3V it is then held at this level until the current has fallen to 200mA, to ensure full charge.
The charging program now switches over to "float charge" stage at a voltage limit of 13.6V for correct long-term maintenance of batteries while out of service.
Should the current drawn by the battery during maintenance "float charge" stage exceed (for any reason) 200mA, the charging program automatically reverts to the constant current charge stage until the battery is again fully charged. The device therefore additionally provides a "stand-by" function.
100% Safe and User-Friendly
Totally safe, even for untrained users. 100% automatic apart from initial 6 or 12 volt battery selection.
The automatic controlled charging parameters ensure no "boiled-dry" or other battery damage.
No worries about wrong battery connection or accidental short-circuits. The circuit is automatically protected and there are no fuses to replace. There are no sparks even in short-circuit conditions.
The charge current is automatically regulated according to the constantly monitored internal temprature to ensure AccuMate's temprature remains safe even in hot locations.
|
|  Accumate Ring ConnectorUse extra Ring Connectors on several batteries that you want to keep charged, this way you have a quick disconnect so you can move your Accumate Charger from one battery to another. One of these connectors come with the Accumate charger and is shown in the picture above.
| | |  LS6/1.2 Accessory PlugLS6/1.2 Accessory. Connection set for battery maintenance through car cigarette lighter or DIN 12V sockets as found on BMW and Triumph motorcycles.
Click On Photo For Larger View
| |
|